Roland ATELIER AT-300 - Manual (Page 59)

57
Using the Registration Buttons
Using the Registration Buttons
There are two ways of calling up the settings affecting the rhythms registered
to the Registration buttons [1]–[8], “INSTANT” and “DELAYED.” At the factory
this is set to “DELAYED.”
Recalling Voices and Other Panel Settings
1.
Press a Registration [1]–[8] button.
Recalling Settings for Rhythm and Automatic
Accompaniment in Addition to the Panel Settings
1.
Press and hold a Registration [1]–[8] button for several
seconds.
The indicator of the rhythm select button will blink, and the panel settings and
settings related to rhythm performance and automatic accompaniment will be
recalled.
Settings for Rhythm play and Automatic Accompaniment are recalled when
you continue holding a Registration [1]–[8] button for several seconds, but you
can change this so that the settings are recalled the instant you press the
button.
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select the
“Arranger Update.”
fig.07-02
3.
Press the Value [-] and [+] buttons to switch between
“DELAYED” and “INSTANT.”
To return to the basic screen, press the [Utility] button.
Recalling a Registration
How to Recall a Registration
Changing the Timing of Recalling Registrations
DELAYED
When you press and hold a Registration [1]–[8] button for several
seconds, the settings for Rhythm and Automatic Accompaniment will be
recalled in addition to the panel settings. If you press and immediately
release a Registration [1]–[8] button, only the settings that are not
related to Rhythm or Automatic Accompaniment will be recalled.
INSTANT
Settings for Rhythm and Automatic Accompaniment will be recalled the
instant that you press a Registration [1]–[8] button.
You can change the timing of
recalling the transpose setting
when you press a Registration
[1]–[8] button. For more
information, please refer to
“Adjust the Standard Pitch
(Master Tune)” (p. 114).
AT-100-300_e.book 57 ページ ２００８年５月７日 水曜日 午後３時３３分