beautypg.com

Error message – Roland ATELIER AT-300 User Manual

Page 131

background image

129

Error Message

Appendices

Error Message

Error Message

Meanings

Copy Protected.
Can’t Save.

To protect the copyright, this music file cannot be saved as SMF format.

Write-Protected
Media.

The protect tab of the storage media is set to the Protect (write prohibit) position.
Move the tab to the Write (write permit) position and try the operation again.

Can’t Save
This Song.

You can only play the music data. It cannot be saved on a storage media

Master Disk

This storage media does not allow initialization or saving. Insert a different storage media and try the
operation again.

Read Only File.

You cannot overwrite-save or delete a file on this storage media.

No Media

Storage media is not connected. Please connect storage media.

Media Full

Saving is not possible because the storage media does not have enough space. Please use other storage
media that has been formatted by the ATELIER.

Unknown Media

This storage media cannot be used. Please format it.

Media Ejected

The storage media was disconnected while it was being accessed. Please try the operation again.

Damaged Media

A damaged area was found on the storage media.

Can’t Read

This data cannot be read.

Can’t Play

Playback was halted because the song could not be read fast enough.
The song could not be read from the storage media fast enough for playback. Press the [Reset] button, then
press the [Play/Stop] button once again.

No Rhythm

There is no rhythm in user memory.

The rhythm used by the selected registration was deleted from user memory, or its order was changed.

Memory Full

The song data is excessively large, and cannot be loaded.

The performance data is excessively large, and cannot be loaded.

The data cannot be stored in user memory since user memory is full.

MIDI Buffer Full

The ATELIER cannot deal with the excessive MIDI data sent from the external MIDI device. Reduce the
amount of MIDI data sent to the ATELIER.

Communication
Error

A MIDI cable or computer cable has been disconnected. Connect it properly and securely.

The ATELIER is unable to handle the data that was sent. Please send data that the ATELIER is able to handle.

A MIDI
transmission error
has occurred.

Data transfer failed. Please transfer the data again.

Memory Full

Recording or editing is not possible because the memory of the ATELIER is full.

Memory Error

An error occurred in internal memory. Please perform the operation again. If this indication appears even
after you’ve repeated the operation several times, please contact Roland service.

This is registration
data of a type that
is not supported.

This instrument cannot use this registration.

USB over current

USB memory not supported by the ATELIER was connected. This USB memory cannot be used with the
ATELIER.

AT-100-300_e.book 129 ページ 2008年5月7日 水曜日 午後3時33分

This manual is related to the following products: