Roland ATELIER AT-300 - Manual (Page 113)

111
Various Other Settings
Various Other Settings
This setting determines whether or not the metronome will
sound.
1. Press the [Utility] button.
2. Using the Menu [ ] or [ ] button, select
“Metronome.”
3. Press the [Rec] button.
4. Using the Menu [ ] or [ ] button, select
“Metronome.”
fig.09-02
5. Press the Value [-] or [+] button to select OFF,
REC, or ON.
To return to the basic screen, press the [Utility] button.
You can adjust the volume of the metronome.
1. Press the [Utility] button.
2. Using the Menu [ ] or [ ] button, select
“Metronome.”
3. Press the [Rec] button.
4. Using the Menu [ ] or [ ] button, select
“Metronome Volume.”
fig.09-03
5. Press the Value [-] or [+] button to select the
desired volume level (1–10).
Increasing the value will raise the volume of the
metronome.
To return to the basic screen, press the [Utility] button.
Changing the Metronome Setting
(Metronome)
Setting Descriptions
OFF Not heard at all
REC Heard only while recording
ON Heard constantly
Adjusting the Metronome Volume
(Metronome Volume)
AT-100-300_e.book 111 ページ ２００８年５月７日 水曜日 午後３時３３分