Roland ATELIER AT-300 - Manual (Page 31)

29
Selecting and Playing Sounds
Selecting and Playing Sounds
Notice that there is an [Others] button for each part. By using the [Others]
button, you can select all voices.
1.
Press the [Others] button for the Part for which you wish to
specify a voice.
The voice name appears in the display.
fig.02-10 (P.29)
The indicator of the selected [Others] button will light.
2.
While the voice name is shown in the display screen, use
the Value [-] [+] buttons to select the desired voice.
The indicator of the selected [Others] button will blink.
To stop mid-way through this or any procedure, press the [Display/Exit]
button.
3.
Once again, press the [Others] button for the part whose
sound you wish to set to confirm the voice.
The indicator of the [Others] button will change from blinking to light.
Selecting a Voice Using the [Others] Button
You can jump by voice group
by pressing Menu [ ] [ ]
buttons to select the voice.
The sound number of each
voice is preceded by an
alphabetical character A–U
(AT-100) or A–V (AT-300)
which indicates the sound
group; e.g., “G11 Strings1.”
You can also press the key for
the part containing a changed
voice to confirm the voice
setting.
About the voices that can be
assigned to an [Others] button,
please refer to ”Voice & Rhythm
List.”
AT-100-300_e.book 29 ページ ２００８年５月７日 水曜日 午後３時３３分