Before you start playing, Setting up the music rest, Connecting the speaker cord (at-300) – Roland ATELIER AT-300 User Manual

Page 18: Opening/closing the lid (at-300)

Before You Start Playing

fig.01-03

Attach the music rest by inserting it into the
two holes.

Connect the speaker box’s speaker cord to the
speaker cord leading from the organ.

Pay attention to the shape of the speaker cable’s
connector, and insert it until you hear it click securely
into place.

fig.00-22.eps

To open the lid, hold it with both hands and
slide it to the rear.

To close the lid, slowly pull it forward until it
stops

Be careful not to get your fingers caught when opening or
closing the lid. Adult supervision is recommended when
small children are going to be using the instrument.

To prevent accidents, be sure to close the lid before moving
the organ.

Make sure you don’t have anything (such as sheet music) on
the keyboard when you close the lid.

Setting Up the Music Rest

Connecting the Speaker Cord
(AT-300)

Speaker Cord

Organ side

Speaker

box side

Opening/Closing the Lid
(AT-300)

NOTE

AT-100-300_e.book 16 ページ２００８年５月７日　水曜日　午後３時３３分

This manual is related to the following products:

ATELIER AT-100