Roland ATELIER AT-300 - Manual (Page 108)

106
Various Other Settings
Initial Touch is a function that translates the force used in
playing the keys into a directly proportional amount of volume.
This adjusts the amount of the Initial Touch effect applied.
1. Press the [Utility] button.
2. Press the Menu [ ] or [ ] button to select
“Initial Touch.”
fig.12-03
3. Press the Menu [ ] or [ ] button to select
“Upper“ or “Lower.”
4. Press the Value [-] and [+] buttons to edit the
value.
To return to the basic screen, press the [Utility] button.
You can set the Bass Pedalboard to play simultaneous multiple
notes or single notes only.
1. Press the [Utility] button.
2. Press the Menu [ ] or [ ] button to select
“PedalBass Mode.”
fig.12-06
3. Press the Value [-] or [+] button to switch the
Pedal Bass Mode “MONOPHONIC” or
“POLYPHONIC.”
To return to the basic screen, press the [Utility] button.
Adjusting How the Instrument
Responds
Adjusting the Initial Touch Sensitivity
(Initial Touch)
Keyboard
Upper, Lower
Setting Descriptions
1–10
Initial Touch is ON.
Striking the keys more forcefully will produce
correspondingly louder sounds.
The change in volume when the keys are
played forcefully increases as the value is
increased.
OFF
Initial Touch is off.
Volume remains constant regardless of how
hard you play.
Changing the Pedalboard Polyphony
(Pedal Bass Mode)
Setting Descriptions
MONOPHONIC Only single notes can be played.
POLYPHONIC Multiple notes can be played.
AT-100-300_e.book 106 ページ ２００８年５月７日 水曜日 午後３時３３分