Roland ATELIER AT-300 - Manual (Page 101)

99
Record and Playback Your Performance
Record and Playback Your Performance
4. Press the [Load] button and [Save] buttons
simultaneously.
The following message, asking you to confirm your
choice, will be displayed.
fig.08-10
To cancel the procedure, press the [Reset] button, and
you will return to the Song Select screen.
5. If you are sure that you wish to delete the
song, press the [Rec] button.
Never turn off the power while the operation is in progress.
Doing so will damage the ATELIER’s internal memory or USB
memory, making it unusable.
You can load commercially available SMF music files into the
ATELIER, and record your own performance on top of it.
During recording, the data you’ve loaded will be played
back, while you record your performance.
1. Prepare the SMF music files.
If you’re using SMF music files from USB memory,
connect it to the external memory connector.
If you’re using SMF music files from a floppy disk,
connect the floppy disk drive to the external memory
connector, and insert the floppy disk.
2. Press the [Song] button (confirm that its
indicator is lit).
The Song Select screen appears.
3. Press the [Media] button to select the media.
If you want to play SMF music files from USB memory,
choose “Ext Memory.” If you want to play SMF music
files from floppy disk, choose “Disk.”
NOTE
Layering a New Recording
onto SMF Music Files
4 5
8 6 10,11
2 3
AT-100-300_e.book 99 ページ ２００８年５月７日 水曜日 午後３時３３分