Roland ATELIER AT-300 - Manual (Page 100)

98
Record and Playback Your Performance
4. Press the Value [-] or [+] button to select the
performance song that you wish to load into
internal memory.
5. Press the [Load] button.
The selected performance data will be loaded into
internal memory.
If the following screen appears
If the performance song in the ATELIER has not been
saved to a USB memory or Favorites (User Memory), the
following message will appears.
fig.E-62.eps
If you wish to erase the performance song
1. Press the [Rec] button.
If you wish to erase the performance song
1. Press the [Reset] button to stop the Save
operation.
Save the song to USB memory or a floppy disk (p. 96).
If loading is canceled because the memory limit has
been reached, the following message will be displayed:
fig.E-30.eps
You can delete a performance song that was saved onto a
“Favorites,” USB memory, or floppy disk.
If you want to delete a song in USB memory, connect your
USB memory to the external memory connector before you
continue.
If you want to delete a song in floppy disk, connect the floppy
disk drive to the external memory connector, and insert a
floppy disk into the drive.
1. Press the [Song] button (confirm that its
indicator is lit).
The Song Select Screen appears.
2. Press the [Media] button to select the media.
If you want to delete a song from the “Favorites,” choose
“Favorites.”
If you want to delete a song from USB memory, choose
“Ext Memory.” If you want to delete a song from floppy
disk, choose “Disk.”
3. Press the Value [-] and [+] button to select the
performance data that you wish to delete.
Deleting Performance Songs
Stored on “Favorites” or the
USB Memory
3 2 1 4
5
AT-100-300_e.book 98 ページ ２００８年５月７日 水曜日 午後３時３３分