Making the connections – Roland ATELIER AT-300 User Manual
Page 126
124
Connecting with External Devices
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before making any connections.
1.
Turn the volume all the way down on the
ATELIER and on the device you’re about to
connect.
2.
Switch off the power to the ATELIER and the
device you’re about to connect.
3.
Use a MIDI cable (sold separately) to connect
the MIDI connectors to each other.
4.
Switch on the power to the ATELIER and the
connected device.
5.
Adjust the volume level on the ATELIER and the
connected device.
6.
You should also set the MIDI send channel as
needed (p. 117).
Connection Example:
Connecting the MIDI Device
Making the Connections
NOTE
Out
In
MIDI
ATELIER
External MIDI Devices
AT-100-300_e.book 124 ページ ２００８年５月７日 水曜日 午後３時３３分