Roland ATELIER AT-300 - Manual (Page 71)

69
Using the Performance Functions
Using the Performance Functions
You can select any of the following functions and assign them
to either Foot Switch on the right or left side of the Expression
Pedal.
1. Press the [Utility] button.
2. Press the Menu [ ] and [ ] buttons to
select “L Foot Switch” or “R Foot Switch.”
ig.12-09
ig.12-09
3. Press the Value [-] and [+] buttons to set the
function to be assigned to the foot switch.
To return to the basic screen, press the [Utility] button.
If the Utility menu “Registration Shift” setting is
“RIGHT”, “LEFT” or
“ RIGHT+LoadNext “ , the Foot
Switch will be dedicated to switching through the
Registrations, and the “R Foot Switch” or “L Foot
Switch” setting will be ignored.
Changing the Function of the Foot
Switch
Setting Descriptions
ROTARY FAST/
SLOW Switch the Rotary speed between
“FAST” and “SLOW.”
GLIDE
While the Foot Switch is pressed, the
pitch will temporarily be lowered,
and will gradually return to normal
when you release the Foot Switch.
Glide effect is added to the voice of
all the sections being played on
Upper keyboard.
Glide is not applied to the
vintage organ.
LEADING BASS
The Leading Bass function (p. 49) will
operate only while you continue
pressing the Foot Switch.
RHYTHM START/
STOP
Start/Stop the Rhythm.
COMP PLAY/STOP
The same function as the Composer
[Play/Stop] button. Each time you
press the Foot Switch, the
performance data will play back or
stop.
NOTE
INTRO/ENDING Play an Intro or Ending.
VARIATION UP
Switches the Variation button. Each
time you press the foot switch, the
Variation number will increment.
VARIATION DOWN
Switches the Variation button. Each
time you press the foot switch, the
Variation number will decrement.
VARIATION ALT
Switches the Variation button. If the
Variation [1] button or [3] button is
selected, this will switch between the
Variation [1] and [3] buttons. If the
Variation [2] button or [4] button is
selected, this will switch between the
Variation [2] and [4] buttons.
FILL IN Adds a fill-in.
BREAK
Stop the Rhythm for one measure
(break).
DAMPER OF UPPER
Notes played on the Upper
keyboard will be sustained only
while you continue pressing the Foot
Switch.
Decay cannot be added to
the Solo voices.
DAMPER OF LOWER
Notes played on the Lower keyboard
will be sustained only while you
continue pressing the Foot Switch.
Decay cannot be added to
the Solo voices.
OFF Turns the foot switch function off.
Setting Descriptions
NOTE
NOTE
NOTE
AT-100-300_e.book 69 ページ ２００８年５月７日 水曜日 午後３時３３分