Roland ATELIER AT-300 - Manual (Page 38)

36
Selecting and Playing Sounds
The ATELIER allows you to adjust the volume balance individually for each
Part.
fig.02-13
The following buttons are used to adjust the volume of a multiple number of
Parts.
t
1.
The volume levels of each part are adjusted using the
corresponding [
▲ ] and [ ▼ ] buttons.
Pressing the [ ▲ ] button will increase the volume.
Pressing the [ ▼ ] button will decrease the volume.
The volume can be set to any value from 0 to 12.
When the volume value shown in the display is 0, that part will produce no
sound.
You can also press the [
▲ ] button or [ ▼ ] button of the part whose volume you
wish to adjust, so that the “Part Balance Monitor” screen is displayed for
several seconds, allowing you to check the volume balance.
fig.02-14
Adjust the Volume Balance
Button Part
Accomp/SMF [ ▲ ] [ ▼ ] button
Automatic Accompaniment (except Bass)
Playback of performance songs from
something other than the ATELIER performance
songs (for example: SMF music files)
Rhythm performance
Drums/SFX
Pedal Level [ ▲ ] [ ▼ ] button
Pedal voice
Bass note of automatic accompaniment
The Part Balance Monitor
screen is displayed for several
seconds and then closes
automatically.
AT-100-300_e.book 36 ページ ２００８年５月７日 水曜日 午後３時３３分