Roland ATELIER AT-300 - Manual (Page 51)

49
Using the Rhythm Performance
Using the Rhythm Performance
When Automatic Accompaniment is used, and the Pedal [To Lower] button is
ON, the Pedal Bass voice will normally play the root note (p. 132) of the
chord you play on the Lower keyboard. If the Leading Bass function is
enabled, the lowest note of the chord you play on the Lower keyboard will
then be used as the bass note (the bottom note of the chord).
For this reason, the bass note will be sounded differently than normal when
you play an inverted chord (p. 132).
1.
Press the [Utility] button.
2.
Press the Menu [ ] and [ ] buttons to select “Leading
Bass.”
3.
Press the Value [-] and [+] buttons to switch the Leading
Bass “ON” or “OFF.”
To return to the basic screen, press the [Utility] button.
Using the Leading Bass Function
Setting Descriptions
ON
The Leading Bass function is ON.
The pedal bass tone will sound the lowest note of the chord
you play in the lower keyboard.
OFF The Leading Bass function is OFF.
You can assign the Leading
Bass functions to either of the
foot switches located on each
side of the Expression Pedal (p.
69).
When the Leading Bass
function (p. 49) is on and the
Chord Intelligence function is
off, you can specify chords with
a combination of the lower
keyboard and pedalboard.
AT-100-300_e.book 49 ページ ２００８年５月７日 水曜日 午後３時３３分