RGB Spectrum Quadra User's Guide - Manual (Page 78)

C O M M A N D L I N E I N T E R F A C E
Command Summary
350-7951 Quadra User’s Guide 70
.
. .
.
.
IMAGE CONTROL
. . . . . . . . . COMMANDS
After you have made adjustments with the Input commands, you can use the
image control commands to adjust parameters such as brightness, contrast and
color. A summary of commands is listed below. Click the desired command to
access detailed instructions.
Refer to the “ Image Control Commands Descriptions ” section for a complete
description of all image control commands.
Table 4-8. Image Control Commands Summary
Command Description
BRIghtness Sets the brightness value of the selected input.
CONTrast Sets the contrast value of the selected input.
FReeZe Turns freeze status of the selected input on or off.
GAMma Sets a gamma value for the selected Quadra output channel.
HUE Sets the hue value of the selected input.
SATuration Sets the saturation value of the selected input.
SHARPness Enables or disables the filter for the selected input.