RGB Spectrum Quadra User's Guide - Manual (Page 51)

O P E R A T I O N S
Sizing the Output Image
350-7951 Quadra User’s Guide 43
.
. .
.
.
S
Example: Assuming an output resolution of 1024 x 768, set
output 1 to full screen. Type:
wdr 1 0 0 1024 768 Enter
S
Example: Place a 100 pixel by 100 line video window at
column 300, line 400 on the monitor for output 2. Type:
wdr 2 300 400 100 100 Enter
S
Example: From a full screen output 1 rectangle, transition
the rectangle (in 5 seconds) to approximately center screen in
an 800 x 600 window. Type:
wdr 1 230 200 800 600 5 Enter
S
Example: Assuming an output resolution of 1280 x 1024
and a full screen image, slide the image off screen (to the left)
in 2.5 seconds. Type:
wdr 1 -1280 0 1280 1024 2.5 Enter
Please note:
• In Appendix A, refer to the “ Image Rectangles ” section for addition
details on WSR and WDR commands.
• You can interactively move the WDR using the POSition and
SETRATE commands. Refer to the “ Using Position ” section for
instructions.