Vlan workgroup summary, Figure 25, Vlan port configuration screen example – Nortel Networks 1000ASE-XD User Manual
Page 68
68
Chapter 2 Network configuration
209418-A
Figure 25 VLAN Port Configuration screen example
VLAN workgroup summary
This section summarizes the VLAN workgroup examples discussed in the
previous sections of this chapter.
As shown in
, Switch S1 (BayStack 420 Switch) is configured with
multiple VLANs:
•
Ports 1, 6, 11, and 12 are in VLAN 1.
•
Ports 2, 3, 4, 7, and 10 are in VLAN 2.
•
Port 8 is in VLAN 3.
Because S4 does not support 802.1Q tagging, a single switch port on each switch
must be used for each VLAN (see
“VLANS spanning multiple untagged
).
The connection to S2 requires only one link between the switches because S1 and
S2 are both BayStack 420 switches that support 802.1Q tagging (see
spanning multiple 802.1Q tagged switches” on page 60
).