Nortel Networks 1000ASE-XD - Manual (Page 127)

Chapter 3 Using the console interface 127
Using the BayStack 420 10/100/1000 Switch
VLAN Display by Port screen
The VLAN Display by Port screen ( Figure 57 ) allows you to view VLAN
characteristics associated with a specified switch port.
Choose VLAN Display by Port (or press d) from the VLAN Configuration Menu
screen to open the VLAN Display by Port screen.
PVID Associates this port with a specific VLAN. For example, a port with a
PVID of 3 assigns all untagged frames received on this port to VLAN 3.
Default 1
Range 1 to 4094
Tagging Allows you to assign VLAN Port Membership tagging options to this port,
as follows:
• Untagged Access: Any VLAN that this port is a member of will not be
802.1Q tagged.
Default Untagged Access
Range Untagged Access, Tagged Trunk
Auto PVID Specifies the port VLAN identifier (PVID) automatically
Table 22 VLAN Port Configuration screen fields (continued)
Field Description