Nortel Networks 1000ASE-XD - Manual (Page 205)

Appendix E Default settings 205
Using the BayStack 420 10/100/1000 Switch
Forward Delay 15 seconds (read only)
Bridge Hello Time 2 seconds (read only)
Bridge Maximum Age Time 20 seconds (read only)
Bridge Forward Delay 15 seconds (read only)
TELNET Access Enabled “TELNET Configuration screen” on
page 164
Login Timeout 1 minute
Login Retries 3
Inactivity Timeout 15 minutes
Event Logging All
Allowed Source IP Address
(10 user-configurable fields)
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
Allowed Source Mask
(10 user-configurable fields)
First field: 0.0.0.0
(no IP address assigned)
Remaining nine fields:
255.255.255.255
(any address is allowed)
Image Filename Zero-length string “Software Download screen” on
page 166
TFTP Server IP Address 0.0.0.0
(no IP address assigned)
Start TFTP Load of New Image No
Configuration Image Filename Zero-length string “Configuration File Download/Upload
screen” on page 169
TFTP Server IP Address 0.0.0.0
(no IP address assigned)
Copy Configuration Image to
Server No
Retrieve Configuration Image from
Server No
Table 56 Factory default settings (continued)
Field Default setting Appears in this CI screen