Nortel Networks 1000ASE-XD - Manual (Page 130)

130 Chapter 3 Using the console interface
209418-A
Figure 59 Port Configuration screen (2 of 2)
Table 24 describes the Port Configuration screen fields.
Table 24 Port Configuration screen fields
Field Description
Port Indicates the switch port numbers that correspond to the field values in that row of
the screen (for example, the field values in row 2 apply to switch port 2). The values
that you set in the Switch row will affect all switch ports and, when the switch is part
of a stack, the values that you set in the Stack row will affect all ports in the entire
stack (except the GBIC ports or fiber optic ports).
Trunk The read-only data displayed in this column indicates the trunks that correspond to
the switch ports specified in the Trunk Members fields of the Trunk Configuration
screen (see
“MultiLink Trunk Configuration Menu screen” on page 133 ).
Status Allows you to disable any of the switch ports. You can also use this field to control
access to any switch port.
Default Value Enabled
Range Enabled, Disabled
Link A read-only field that indicates the current link state of the corresponding port, as
follows:
• Up: The port is connected and operational.
• Down: The port is not connected or is not operational.