Nortel Networks 1000ASE-XD - Manual (Page 167)

Chapter 3 Using the console interface 167
Using the BayStack 420 10/100/1000 Switch
To download the software image, you need a properly configured Trivial File
Transfer Protocol (TFTP) server in your network, and an IP address for the switch
(or stack, if configured). To learn how to configure the switch or stack IP address,
refer to
“IP Configuration/Setup screen” on page 94 .
To open the Software Download screen:
You can monitor the software download process by observing the LEDs
(see
“LED Indications during the download process” on page 169 ).
Precaución: No interrumpa la alimentación del dispositivo durante el
proceso de descarga del software. Si lo hace, puede alterar la imagen de
la programación (firmware).
Attenzione: Non interrompere l'alimentazione elettrica al dispositivo
durante il processo di scaricamento del software. In caso di interruzione,
l'immagine firmware potrebbe danneggiarsi.
Choose Software Download (or press f) from the main menu.