Nortel Networks 1000ASE-XD - Manual (Page 140)

140 Chapter 3 Using the console interface
209418-A
To open the Port Mirroring Configuration screen:
Figure 65 Port Mirroring Configuration screen
Table 29 describes the Port Mirroring Configuration screen fields.
Choose Port Mirroring Configuration (or press i) from the Switch
Configuration Menu screen.
Table 29 Port Mirroring Configuration screen fields
Field Description
Monitoring Mode Allows a user to select any one of six port-based monitoring modes or any one of five
address-based monitoring modes (see
Table 30 on page 141 ). Selecting any one of
the six port-based modes activates the port X and port Y screen fields, where a user
can choose up to two ports to monitor. Selecting any one of the five address-based
modes activates the Address A and Address B screen fields, where a user can
specify MAC addresses to monitor.
Default Value Disabled
Range See Table 30 on page 141