Nortel Networks 1000ASE-XD - Manual (Page 126)

126 Chapter 3 Using the console interface
209418-A
Figure 56 VLAN Port Configuration screen
Table 22 describes the VLAN Port Configuration screen fields.
Table 22 VLAN Port Configuration screen fields
Field Description
Unit Allows you to select a switch in your stack. To view another switch, type
its switch number and press [Enter], or press the spacebar to toggle the
switch numbers.
Port Allows you to select the number of the port you want to view or
configure. To view another port, type its port number and press [Enter],
or press the spacebar to toggle the port numbers.
Filter Untagged Frames Sets this port to filter (discard) all received untagged frames.
Default No
Range No, Yes
Port Name The default port name (with associated stack unit number when
configured) assigned to this port. You can change this field to any name
that is up to 16 characters long.
Default Unit x, Port x
Range Any ASCII string of up to 16 printable characters