NETGEAR ProSafe WNDAP330 - Manual (Page 97)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Advanced Configuration 4-5
v1.0, May 2008
Configuring Advanced Wireless Settings
The Advanced screen of the Wireless Settings menu is used to configure and enable various
wireless LAN parameters for both the 11a/n and 11b/g/n modes. The default wireless LAN
parameters usually work well. However, you can use these settings to fine tune the overall
performance of your wireless access point for your environment.
The Wireless Settings option of the Advanced menu is used to configure the Wireless LAN
parameters. The default advanced wireless LAN parameter settings usually work well.
Configuring 802.11b/g/n Advanced Wireless Settings
To configure advanced Wireless Settings:
1. Under the Configuration tab, select Wireless.
2. From the left-hand menu, select Advanced, and then select Wireless Settings.