NETGEAR ProSafe WNDAP330 - Manual (Page 38)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-12 Basic Installation and Configuration
v1.0, May 2008
Logging In Using the Default IP Address
After you install the WNDAP330, log in to the wireless access point to configure the basic settings
and the wireless settings. The WNDAP330 is set, by default, with the IP address of 192.168.0.230
with DHCP disabled.
To log in using the default IP Address:
1. Open a Web browser such as Internet Explorer, Mozilla Firefox, or Netscape Navigator.
2. Connect to the WNDAP330 by entering its default address of http://192.168.0.230 into your
browser. The login screen will display. Enter admin
for the user name and password for the
password, both in lower case letters.
3. Click Login.
Note: The computer you are using to connect to the WNDAP330 should be configured
with an IP address that starts with 192.168.0.x and a Subnet Mask of
255.255.255.0.
Figure 2-8