NETGEAR ProSafe WNDAP330 - Manual (Page 102)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
4-10 Advanced Configuration
v1.0, May 2008
The QoS options on the WNDAP330 are as follows:
• AP EDCA Parameters. Specify the AP EDCA parameters for different types of data
transmitted from the WNDAP330 Wireless Access Point to the wireless client.
• Station EDCA Parameters. Specify the Station EDCA parameters for different types of
data transmitted from the wireless client to the WNDAP330 Wireless Access Point. If
WMM is disabled, you cannot configure Station EDCA parameters.
Table 4-1 describes the settings for QoS Queues.
Figure 4-5
Table 4-1. QoS Queues and Parameters
QoS Queue Description
Data 0 (Voice) High priority queue, minimum delay. Time-sensitive data such as VoIP
and streaming media are automatically sent to this queue.
Data 1(Video) High priority queue, minimum delay. Time-sensitive video data is
automatically sent to this queue.