N in, Figure 2-6 – NETGEAR ProSafe WNDAP330 User Manual

Page 35

Text mode
Original mode

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual

Basic Installation and Configuration

2-9

v1.0, May 2008

2. Configure the following information:

–

Time Zone. From the pull-down menu, select the local time zone for your wireless access
point from a list of all available time zones. The default is USA-Pacific.

–

NTP Client. Enable NTP Client to synchronize the time of the access point with an NTP
Server. The Default is Enabled.

–

Use Custom NTP Server. Check the option if you have a custom NTP server. The default
is Disabled.

–

Hostname / IP Address. Enter the host name or the IP address of the custom NTP server.
The default is time-b.netgear.com.

3. Click Apply.

Figure 2-6

Note: You must have an Internet connection to get the current time.