NETGEAR ProSafe WNDAP330 - Manual (Page 137)

Index-1
v1.0, May 2008
Index
Numerics
192.168.0.210, Static IP Address 2-4
192.168.0.230, default address 2-4
255.255.255.0
default subnet 2-4
3DES 3-3
802.11a default name 2-11
802.11a/g 1-4
802.11b/g default name 2-11
802.1Q VLAN 1-2
A
Access Controll screens 2-43
Access Point name, default 2-6
ACK 1-5
Activity Log 3-12
Activity Log screen 3-13
Advailable Wireless Stations 2-43
Advanced Access Point Settings screens 4-12
Advanced screens of Wireless Settings 4-5, 4-7
AES 2-38, 2-40
WPA2-PSK, use with 2-40
Aggregation Length
default settings 4-7, 4-9
AMPDU
default settings 4-7, 4-9
Antenna
2.4 GHz 1-10
5 GHZ 1-10
antenna position 2-2, 2-10
AP EDCA parameters 4-10
Auto Uplink 1-4, 1-5
B
Band selection 1-3
Beacon Interval
default setting 4-7, 4-9
Broadcast Wireless Network Name (SSID) 2-16, 2-19, 2-
25
Broadcast Wireless Network Name. See SSID
BSSID 1-2
C
Carrier Sense Multiple Access with Collision Detection.
See CSMA/CD.
Category 5 Ethernet cable 1-7
Change Password screen 3-10
channel
interference,multiple access points
channel spacing 2-2
Channel Width 2-17, 2-20
Channel/Frequency 2-16, 2-19
CLI 3-3
command set 3-4
command sets C-1
configuration
erasing 3-9
restore 3-7
configuration file
backup and restore settings 3-7
retrieving 3-8, 3-9
saving 3-8
crossover cable 1-5
CSMA/CD 4-6, 4-8
Customer support 1-ii