NETGEAR ProSafe WNDAP330 - Manual (Page 50)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-24 Basic Installation and Configuration
v1.0, May 2008
An overview of the information that is required to set up a Security Profile follows—including a
description of the Network Authentication choices that are available:
• Profile Definition. Configure the following settings:
• Security Profile Name. Use a name that makes it easy to recognize the profile—and to
tell profiles apart. (The default names are NETGEAR, NETGEAR-1, NETGEAR-2, and
so on.) You can enter a value of up to 32 alphanumeric characters.
• Wireless Network Name (SSID). This is the name of your wireless network. It is set to
the default name of NETGEAR_11a for 802.11a/n and NETGEAR_11g for 802.11b/g/n.
Figure 2-13
Note: Only the first profile is enabled by default. The rest of the profiles are disabled
and must be enabled if configured.