NETGEAR ProSafe WNDAP330 - Manual (Page 34)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
2-8 Basic Installation and Configuration
v1.0, May 2008
8. Select IP on the main menu. The IP Settings screen will display, as shown in Figure 2-5 .
9. Configure the IP Address settings appropriate for your network. The default values are
suitable for most users and situations. (See the online help or “Setting Basic IP Options” on
page 2-13 for more information about how to configure the settings on this screen.
10. Click Apply.
Configuring Time Settings
To configure your time settings:
1. Under the Configuration tab, select System from the main menu, select Basic, and then select
Time. The Time screen will display, as shown in Figure 2-6 .
Figure 2-5