NETGEAR ProSafe WNDAP330 - Manual (Page 139)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Index-3
v1.0, May 2008
IP Subnet mask
default 2-14
L
LAN IP address
default 2-42, 5-3
LED indicators
table of 1-8
Login screen 2-5
login screen 2-12
M
MAC address 2-42
restricting access 2-3
trusted PCs 2-3
MAC Address Database
Local 2-43
RADIUS 2-43
MAC Authentication 2-42
MAC Authentication screen 2-42
MCS Index 2-16, 2-19
multiple access points
placement of 2-2
N
NetBIOS 2-6
Network Authentication 2-25
types of 2-25
Network Key. See passphrase.
NTP Client
enabling 2-9
NTP Server
enabling 2-9
NTP Server Hostname IP Address 2-9
null-modem cable 3-3
O
Output Power 2-17, 2-20
P
package contents 1-6
Packet fragmentation 1-5
passphrase
use with WEP 2-35
WPA2-PSK, use with 2-40
WPA-PSK/WPA2-PSK, use with 2-41
password
default 2-12, 2-22, 2-42
performance degradation
causes of 2-2
point-to-multi-point bridge 4-11
configuring 4-16
point-to-multi-point bridge. 1-3
point-to-point bridge 1-3, 4-11
configuring 4-14
power adapter 1-11
Preamble Type
defalt setting 4-7
Primary DNS Servers
default 2-14
Q
QoS Settings screen 2-21
QoS. See Quality of Service 1-4
Quality of Service 1-4
R
RADIUS Server 2-23
RADIUS Server Settings 2-30, 2-36, 2-37, 2-38
RADIUS Server Settings screen 2-30, 2-36, 2-37, 2-38
Range 2-1
Read-Only Community Name
default setting 3-2
Read-Write Community Name
default name 3-2
rear panel
diagram of 1-10
Reboot 3-10, 5-4