NETGEAR ProSafe WNDAP330 - Manual (Page 140)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Index-4
v1.0, May 2008
Receive Traps 3-2
reception range
equipment placement 2-1
registering 1-ii
Remote Console 3-1
remote management
via Telenet 3-1
Remote Management screen 3-1
Repeater 4-12
repeater mode
enabling 4-1
Repeater, wireless
configuring 4-18
Reset to Factory Defaults 3-10
restore configuration 3-7
restore default settings 3-9
Restore Defaults screen 3-10
restricting access
MAC address, using 2-42
RIFS Transmission
default settings 4-7, 4-9
Rogue AP Detection screen 3-19
Rogue AP menu 3-19, 3-21
RTS Threshold
default setting 4-6, 4-8
RTS/CTS handshake 1-5
S
Secondary DNS Servers
default 2-14
security
network enhancements 2-3
WPA 2-3
WPA-PSK 2-3
security options
WEP data encryption 2-3
WPA-PSK 2-3
Security Profile
Authentication Settings 2-25
Profile Definition 2-24
with WPA 2-36, 2-37, 2-39
security profile
about 2-23
default settings 2-22
Security Profile Name 2-24
Security Profiles
screens 2-23
serial
DTE connection 1-10
port 1-10
serial console
port 1-10
SNMP 1-2, 3-1
default setting 3-2
software upgrade 3-5
SSH1 3-3
SSID 1-4, 2-23
11a default name 2-16, 2-19, 2-24, 2-25
11b/g default name 2-16, 2-19, 2-24, 2-25
802.11a default 2-11
802.11b/g default 2-11
disabling, consequences of 2-3
Static IP Address, 192.168.0.210 2-4
Station EDCA Parameters 4-10
Statistics
field descriptions 3-16
screen 3-15
Subnet Mask
default 5-3
Support 1-ii
supported standards 1-2
Syslog 3-11
system information screen
field descriptions 3-13
system requirements 1-6
System status screen 3-14
T
TCP/IP
configuration for DHCP server 4-2
Technical Specifications A-3
Telnet