NETGEAR ProSafe WNDAP330 - Manual (Page 88)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
3-18 Management
v1.0, May 2008
To view the Wireless Station List:
1. Under the Monitoring tab, select Wireless Stations on the main menu. The Wireless Stations
list will display, as shown in Figure 3-13 .
2. Click Refresh to update the list.
Enabling Rogue AP Detection
The WNDAP330 can detect rogue APs and wireless stations and can exclude them from
connecting to the WNDAP330 Wireless Access Point.
To enable Rogue AP Detection:
Figure 3-13
Tip: If the wireless access point is rebooted, the table data is lost until the wireless
access point rediscovers the devices. To force the wireless access point to look
for associated devices, click the Refresh button.