NETGEAR ProSafe WNDAP330 - Manual (Page 39)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration 2-13
v1.0, May 2008
Your Web browser should automatically find the WNDAP330 Wireless Access Point and
display the home screen.
Setting Basic IP Options
The basic IP settings for your wireless access point are entered on this screen. Most of the default
settings will work in most cases. However, if your wireless access point is part of a more complex
LAN network, then modify the settings to meet the requirements of your network based on the
explanation of the various fields.
To configure the basic IP settings of your wireless access point:
1. Under Configuration, select IP, and then IP Settings. The IP Settings screen will display as
shown in Figure 2-9 below.
2. Enter the IP Address fields of the WNDAP330.
Figure 2-9