NETGEAR ProSafe WNDAP330 - Manual (Page 47)

ProSafe Dual Band Wireless Access Point WNDAP330 Reference Manual
Basic Installation and Configuration 2-21
v1.0, May 2008
Configuring QoS Settings
Wi-Fi Multimedia Support (WMM). Wireless Multimedia (WMM) is a subset of the 802.11e
standard. WMM allows wireless traffic to have a range of priorities, depending on the type of data.
Time-dependent information, such as video or audio, has a higher priority than normal traffic. For
WMM to function correctly, Wireless clients must also support WMM.
To configure your wireless QoS settings for 11b/g/n and 11a/n:
1. Under the Configuration tab, select Wireless from the main menu, select Basic, and then select
QoS Settings from the left-hand menu. The QoS Settings screen will display, as shown in
Figure 2-12 .
2. Wi-FI Multimedia (WMM) is enabled (Yes) by default. Select the No radio button to disable
WMM support.
3. Click Apply to save your settings
Figure 2-12