Paradyne ACCULINK 317x E1 - Manual (Page 31)

Operation
3-9 3170-A2-GB20-20 December 1996
To change the customer identification (CID),
1. Press the key on the top-level menu to bring
the Ctrl branch onto the front panel LCD.
F1
DSU E1 CEPT
Stat
Test Cnfig
F2 F3
2. Press F3 to select Ctrl from the top-level menu
screen.
F1
DSU E1 CEPT
Test
Cnfig Ctrl
F2 F3
3. Press the key on the Control screen until the
CID selection appears on the front panel LCD.
F1
Control:
Rel
LED ClrReg
F2 F3
4. Select CID.
F1
Control:
Reset
CID DL
F2 F3
5. Use the and keys to position the cursor
under the desired character. You must enter a
character before the
moves the cursor to the
next space to the right.
F1
CustID:xxxxxxxx
Up
Down Save
F2 F3
6. Enter the desired ID. Press F1 (Up) and F2
(Down) to scroll up and down through the valid
characters/numbers for the customer ID. Valid
characters are 0 through 9, #, -, ., /, A to Z, and
blank space. Press F3 (Save) to save the ID.
F1
CustID:xxxxxxxx
Up
Down Save
F2 F3