Paradyne ACCULINK 317x E1 - Manual (Page 30)

ACCULINK 317x E1 DSU/CSU
3-8 December 1996 3170-A2-GB20-20
Displaying Unit Identity
The identity of the E1 DSU/CSU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu).
The customer identification is the only identity number
you can change.
To display the E1 DSU/CSU’s identity (ID),
1. Press F1 to select Status from the top-level menu
screen.
F1
DSU E1 CEPT
Stat
Test Cnfig
F2 F3
2. Press the key three times on the Status screen
to bring the ID selection onto the front panel LCD.
F1
Status:
DevHS STest
Perf
F2 F3
3. Press F3 to select ID from the Status screen.
F1
Status:
TStat
LED ID
F2 F3
4. The following screens appear in the order listed
each time you press the key.
F1
Identity:
Ser=xxxxxxx
F2 F3
F1
Identity:
Mod=xxxx-xx-xxx
F2 F3
NOTE
The third-from-last digit in the
model number may vary due to
the type of power supply shipped
with the E1 DSU/CSU. Refer to
the label on the bottom of the E1
DSU/CSU for the correct model
number.
F1
Identity:
Cust ID=xxxxxxxx
F2 F3
F1
Identity:
SRev=xx.xx.xx
F2 F3
F1
Identity:
CCA1=xxxx-xxx
F2 F3
F1
Identity:
CCA2=xxxx-xxx
F2 F3