Philips HDR3700 - Manual (Page 81)

81 EN
HDMI
1
In stop mode, press [HOME]. Select
“General Settings” using [
U \ D],
then press [OK].
• Make sure that the HDMI cable is connected and the
TV input is set to HDMI.
2
Select “HDMI” using [ U \ D], then
press [OK].
3
Select the desired item using
[
U \ D], then press [OK].
4
Refer to pages 81 - 82 and set the
selected item.
5
When you finish with the setting,
press [HOME] to exit.
You can select the colour space for HDMI output.
Set the appropriate colour space for your display
device.
Select a setting using [ U \ D], then
press [OK].
• When the connected device is not compatible with
the Y/Cb/Cr, HDMI signal is output as RGB
regardless of the setting.
Your setting is activated.
If you do not want to output the audio through HDMI
(when the digital audio output of the unit is connected
to an audio amplifier system, etc.), you can set the
HDMI audio output off.
Select a setting using [
U \ D], then
press [OK].
• Set to “OFF” when the HDMI sound is not output.
Your setting is activated.
You can adjust the black level to make the dark areas
of the HDMI images brighter.
Select a setting using [
U \ D], then
press [OK].
• Select “Enhanced” if the black-white contrast is not
clear.
• This setting is effective only for HDMI RGB output.
Your setting is activated.
This feature is only applicable if this unit is connected
to HDMI CEC compliant TV/device. It enables all the
linked devices response or react to certain commands
simultaneously with one touch control.
Select a setting using [
U \ D], then
press [OK].
Your setting is activated.
1 Format (Default: RGB)
1
2
3
4 Format
HDMI Audio
HDMI
Black Level
EasyLink
General Settings
Format
HDMI Audio
HDMI
YCbCr
RGB
Black Level
EasyLink
Format
2 HDMI Audio (Default: ON)
3 Black Level (Default: Normal)
4 EasyLink (Default: ON)
General Settings
Format
HDMI Audio
HDMI
OFF
ON
Black Level
EasyLink
HDMI Audio
General Settings
Format
HDMI Audio
HDMI
Enhanced
Normal
Black Level
EasyLink
Black Level
General Settings
Format
HDMI Audio
HDMI
OFF
ON
Black Level
EasyLink
EasyLink
In
trod
ucti
on
Con
n
ec
ti
on
s
In
iti
al
Setup
P
layb
ack
Edi
tin
g
O
thers
General Settings
Reco
rdi
n
g
E2N41BN_EN.book Page 81 Wednesday, July 2, 2008 4:36 PM