Philips HDR3700 - Manual (Page 23)

23 EN
Using [Alphanumeric keypad]:
You can select a channel using
[Alphanumeric keypad].
• Analogue channels will be stored in channel 1-99
and digital channels will be stored in channel 1-899
after it is scanned by this unit.
Using [SOURCE] button:
You can switch between digital channels, analogue
channels and external input (AV1/AV2/AV3/DV(AV4))
by pressing [SOURCE] repeatedly. The mode
changes as follows:
Please be noted that the analogue/digital channel will
be skipped when it is not stored at all.
Using [PROGRAM + / –] button:
• You can switch between digital channels when
watching digital programmes.
• You can switch between analogue channels when
watching analogue programmes.
• You can switch between the external inputs when
enjoying data from external devices.
Note
• You cannot switch between the digital channels, the
analogue channels and external inputs.
You can switch between TV audio modes by pressing
[AUDIO]. Each mode is indicated on the TV screen.
• During reception of analogue bilingual broadcasts
• If the programme does not have more than one
sound track, [AUDIO] is not effective.
Many broadcasters provide a Digital Text Service in
the form of a dedicated Teletext channel. This Digital
Text Service includes high quality text and graphics
along with advanced navigation options.
1
Press [TEXT] to display Teletext screen.
• Digital Text for the TV channel you have
selected will be displayed.
2
Use [RED] / [GREEN] / [YELLOW] /
[BLUE] to follow the instructions on
screen.
3
Press [TEXT] to switch the Teletext
display off.
Note
• This unit supports MHEG5 data service.
• This unit does not support MHP data service.
• If you display the Teletext screen during the
recording, the Teletext screen will be recorded. In
addition, you cannot use [Alphanumeric keypad]
for changing Teletext pages. Use [
U \ D \ L \ P]
and [OK] to change the Teletext pages.
Electronic programme guide (On-screen TV guide)
gives you a list of the digital TV programmes and
detailed information about the programmes.
1
In stop mode, press [GUIDE].
• Select the TV programme using
[ U \ D \ L \ P], then press [HOME] or
[GUIDE] to exit.
• From the EPG screen, you can also set the
timer recording. Select the TV programme using
[
U \ D \ L \ P], then press [OK] or [BLUE] to
go to “Timer Programming” menu. Refer to
“Timer Recording (EPG)” on page 33.
e.g.) Daily mode
1 EPG menu mode
2 Current date / time
3 Date of selected programme
4 Channel number / name
5 Channel programme
6 Currently Highlighted Programme on EPG
7 Programmes set for the timer recording
: Programmes set for the series link timer
recording.
: Once only timer recording.
• For the series link timer recording, refer to
“Series Link Timer Recording” on page 34.
Select a Channel
e.g.) digital channel
6 ch: Press [6], then wait for 2 seconds or
press [0], [0], [6].
15 ch: Press [1], [5], then wait for 2 seconds or
press [0], [1], [5].
173 ch: Press [1], [7], [3], then wait for 2 seconds
(entering three-digit channel number is
only valid with digital channels).
Selecting the Audio Mode
ANALOG
Mode Audio output
Display on
the TV screen
Main Main audio from both speakers Main
Sub Sub audio from both speakers Sub
Main /
Sub
• Main audio from the left speaker
• Sub audio from the right speaker
Main/Sub
the last digital CH „ the last analogue CH „ the last external input
(AV1/AV2/AV3/DV(AV4))
Digital Text Service
DIGITAL
EPG (Electronic Programme Guide)
DIGITAL
1
2
4
3
5
6
10:25-11:10 news
12:00-13:00 show
13:00-13:30 musical
13:30-14:35 variety show
19:30-20:00 news
20:00-21:00 drama
Date 18/01/2008
Time 10:30:56
18/01/2008 (Friday)
10:25-11:10 The Montel
1
2
3
4
5 E4
6
7
Daily mode
1 ITV1
2 ITV2
3 ITV3
4 Channel
5 E4
6 More 4
D/W Series Extended Timer
In
tr
od
uct
ion
Con
n
ec
ti
o
n
s
In
it
ia
l S
e
tup
Pl
ay
bac
k
Edi
tin
g
O
th
ers
General Settings
Recording
E2N41BN_EN.book Page 23 Wednesday, July 2, 2008 4:36 PM