Palm TX - Manual (Page 583)

Palm ® T|X Handheld 561
CHAPTER 26 Customizing Your Handheld
Connecting your handheld to other handhelds
You do not need to use Connection Preferences if you are using the built-in Bluetooth
wireless technology to connect your handheld to another handheld or using the Wi-Fi functionality
to connect your handheld to a Wi-Fi network. See the Bluetooth and Wi-Fi chapters for connection
setup instructions. Use Connection Preferences for other connection types.
Connection Preferences let you connect your handheld to other handhelds. You can use preset
connection settings, modify the preset settings, or create your own connection settings from
scratch. The list of preset connections varies depending on the applications you’ve added to
your handheld.
2
Select the pick lists to change any of the following settings, and then
select Done.
Auto-off after Select how quickly your handheld automatically turns off after a
period of inactivity: 30 seconds, 1 minute, 2 minutes, or 3 minutes.
On while charging Select whether your handheld stays on continuously when
it is connected to the AC charger. When this option is off, you can still turn on
your handheld to view your info while your handheld charges, but it turns off
automatically after a period of inactivity.
Beam Receive Select whether you can receive beamed information on your
handheld. Turn this setting on to receive beamed info, or turn it off to prevent
receiving beamed info.
Done
»
Key Term
ISP Acronym for
Internet service provider.
This is the service you
use to connect to the
Internet.
Did You Know?
You cannot rename
or delete the preset
connection settings.
NOTE