Palm TX - Manual (Page 298)

Palm ® T|X Handheld 264
CHAPTER 14 Making Wi-Fi ® Wireless Connections
Accessing email and the web with Wi-Fi technology
After you set up a connection with a Wi-Fi network, you can send and receive email or browse
the web wirelessly using this connection.
Wi-Fi functionality must be on before you can use it to make wireless connections.
0
1
Open the email application or the web browser.
2
Tap Wi-Fi controls on the status bar.
3
Make sure that Wi-Fi is set to On.
4
Connect to the Wi-Fi network:
a. Select the Network pick list, and then select the network you want.
b. Select Connect. When the connection is completed, you are returned
to the application you were in when you opened the Wi-Fi controls.
Continued
NOTE
Before You Begin [ ! ]
You need to perform the
following:
• You must set up a Wi-Fi
network connection.
• You must set up an
email account on your
handheld before you can
send or receive email
messages.
Tip
If the Wi-Fi application is
already on, you can
change to another
network by tapping the
Wi-Fi controls on the
status bar, and then
selecting Scan. Your
handheld scans for
available networks.
Select the network
you want to from the
available networks list.