Palm TX - Manual (Page 100)

Palm ® T|X Handheld 78
CHAPTER 5 Moving Info Between Your Handheld and Your Computer
Synchronizing with a cable or IR port
You can synchronize using a cable, IR port, Wi-Fi or Bluetooth wireless technology, or a modem.
Synchronizing with a cable
0
1
Connect the USB sync cable to
the USB port on your computer,
and then insert the other end into
your handheld.
Continued
Before You Begin [ ! ]
To synchronize, HotSync
manager must be active.
• HotSync manager was
installed when you
installed Palm Desktop
software; if you didn’t
install Palm Desktop
software, you don’t have
HotSync manager on
your computer.
• On a Windows
computer, you know
HotSync manager is
active when its icon
appears in the lower-right
corner of your screen. If
the icon is not there, turn
it on by clicking Start, and
then selecting Programs.
Navigate to the Palm
folder, and select
HotSync manager.