Palm TX - Manual (Page 487)

Palm ® T|X Handheld 465
CHAPTER 20 Sharing Information
Using the Send command with the VersaMail ® application
You can send information as an attachment to an email message using the Send command.
Follow the procedures for sending information, a category, or an application. Select VersaMail in
the Send With dialog box. The VersaMail
® application opens, displaying a blank message with the
information you want to send as an attachment. Address the message, enter a subject line, and
then select Send or Get & Send.
Using the Send command with SMS
You cannot send a category or an application with SMS.
You can send information as part of a text message using the Send command. Follow the
procedure for sending information. Select SMS in the Send With dialog box. The SMS application
opens, displaying a new text message with the information you want to send as the body of the
message. Address the message, and then select Send.
Beaming
Using the IR port on your handheld, you can beam information from within an application, such
as a photo or video, a contact, an appointment, or a task, to other Palm Powered
™ handhelds.
You can also beam a category of information or even an entire application.
The receiving handheld must be turned on. Depending on the receiving handheld
model, not all information may be sent correctly.
NOTE
Tip
For best results when
beaming, the handhelds
should be between 4 and
39 inches (10 centimeters
and one meter) apart, and
there should be a clear
path between them.
Tip
Beaming works best for
smaller items. If you have
larger items, you can use
Bluetooth wireless
technology. Expansion
cards are convenient for
sharing very large items.
NOTE