Palm TX - Manual (Page 122)

Palm ® T|X Handheld 100
CHAPTER 5 Moving Info Between Your Handheld and Your Computer
2
On the computer with which you want to synchronize (your own computer)
only, do the following:
a. Select Setup from the HotSync manager menu.
b. Click the Network tab and make sure your username has a checkmark next
to it. If the checkmark is not there, check the box next to your username.
c. Click OK.
d. Tap the HotSync icon on your handheld to record your computer’s
network information on your handheld. You must use the cable or the IR
port for this synchronization.
Continued
Tip
Click TCP/IP Settings
to display the primary
settings for your
computer. Check that
these settings are correct
on your handheld by
selecting the HotSync
icon on the Applications
View, and then selecting
Primary PC Setup from
the Options menu. If the
settings do not match,
restart your computer
and synchronize using
the cable or IR port before
synchronizing by
connecting to a computer
on the network.