Palm TX - Manual (Page 117)

Palm ® T|X Handheld 95
CHAPTER 5 Moving Info Between Your Handheld and Your Computer
Synchronizing by dialing in to a network
WINDOWS ONLY
The first time you synchronize, you must use the cable or infrared
communication. After that, you can synchronize over a network.
0
1
Prepare your computer for network synchronization:
a. Turn on your computer.
b. Click the HotSync manager icon in the taskbar in the lower-right corner
of your screen, and then select Network.
c. Click the HotSync manager icon again, and then select Setup.
Continued
IMPORTANT [ ! ]
Before You Begin [ ! ]
The following setup must
be done before you can
synchronize over a
network:
• Your computer must
have TCP/IP installed.
• Your company’s
network system and its
remote access server
must support TCP/IP.
• You must have a
remote access account.
Check with your system
administrator for
assistance.
To synchronize by dialing
in to a network, you must
also have a mobile phone
(sold separately) that you
can use as a modem to
dial in to the network, or
an attachable modem
accessory (sold
separately).