Pioneer RM V2550BU - Manual (Page 192)

182
MVP MANUAL
(21) Model table reference [TBL command]
Input : TBLh
1
h
2
Explanation : hh model data No. (Refer to the M command for the model data No.)
• Displays the data table of the model data h
1
h
2
model.
When h
1
h
2
is omitted, displays the data table of the model connected to the VS board currently.
(Example)
: TBL
MODEL NO.=09 AUTO (Indicated autolocked to PC9800.)
ADDR 0 1 2 3 4 5 6 7 8 9 A B C D E F
C140 09 48 30 08 48 01 45 06 40 38 20 FF FF FF FF
C150 FF 05 64 32 04 40 00 30 04 00 11 FF FF FF FF FF
C160 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C170 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
ADDR 0 1 2 3 4 5 6 7 8 9 A B C D E F
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F
30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F
The address of is:
C140 (Left number) +1 (Top number)=C141 address.
This address is considered as the hexadecimal address conforming to C140.
The relative addresses on the table are as follows. (Not model data.)