Pioneer RM V2550BU - Manual (Page 134)

124
ADJUSTMENTS
3 List of GET commands
What are GET commands?
¶ Commands which output adjustment data, etc. from MPJ microprocessor to the PC.
¶ The adjustment data is output for every mode.
Example 1) When command is set when CONV.DATA MEMO-1 is selected, the GREEN horizon-
tal convergence data of MEMO-1 will be get. In the same way, when command is set
when CONV.DATA MEMO 2 to 3 are selected, the GREEN horizontal convergence data of
MEMO-2 to 3 will be get.
Example 2) When command is set when COLOR MODE =1 and at the same time, INPUT=RGB,
the W/B DATA for COLOR MODE=1 and INPUT=RGB will be get.
¶ Only valid for one ID. (Invalid for ID=**, 1*, *1, etc.)
¶ The adjustment data, etc. is output in ASCII codes.
(Note) < > indicates the command name.
[1] (GET RH CONV.DATA) — RED horizontal convergence data is output.
(GET GH CONV.DATA) — GREEN horizontal convergence data is output.
(GET BH CONV.DATA) — BLUE horizontal convergence data is output.
Format : Output in the following order.
1 STX (02H)
2 <
&30>/&H STATIC adjustment data (3 BYTE)
3 < &31>/&H SKEW adjustment data (3 BYTE)
4 <
&32>/&H BOW adjustment data (3 BYTE)
5 <
&36>/&H SIZE
adjustment data (3 BYTE)
6 < &42>/&H LINEARITY adjustment data (3 BYTE)
7 < &37>/&H KEY adjustment data (3 BYTE)
8 < &43>/&H SUB KEY adjustment data (3 BYTE)
9 <
&38>/&H PIN adjustment data (3 BYTE)
0 <
&44>/&H SUB PIN
adjustment data (3 BYTE)
- < &33>/&H 3D SKEW adjustment data (3 BYTE)
= < &34>/&H 4D BOW adjustment data (3 BYTE)
~ <
&53>/&H 5D SKEW adjustment data (3 BYTE)
! <
&59>/&H 6D BOW
adjustment data (3 BYTE)
@ < &48>/&H MID SIZE adjustment data (3 BYTE)
# < &54>/&H MID LIN adjustment data (3 BYTE)
$ <
&41>/&H 5D SIZE adjustment data (3 BYTE)
% <
&47>/&H 6D LIN
adjustment data (3 BYTE)
^ < &39>/&H 3D KEY adjustment data (3 BYTE)
& < &45>/&H 3D S-KEY adjustment data (3 BYTE)
* <
&40>/&H 4D PIN adjustment data (3 BYTE)
( <
&46>/&H 4D S-PIN adjustment data (3 BYTE)
) <
&49>/&H MID KEY
adjustment data (3 BYTE)
_ < &55>/&H MID S-KEY adjustment data (3 BYTE)
+ < &50>/&H MID PIN adjustment data (3 BYTE)
¡ <
&56>/&H MID S-PIN adjustment data (3 BYTE)
™ <
&51>/&H MID 3D KEY
adjustment data (3 BYTE)
£ < &57>/&H MID 3D S-KEY adjustment data (3 BYTE)
¢ < &52>/&H MID 4D PIN adjustment data (3 BYTE)
∞ <
&58>/&H MID 4D S-PIN adjustment data (3 BYTE)
§ ETX (03H)
(Note) & : R or G or B