Lucent Technologies PortMaster - Manual (Page 56)

Configuring SNMP
3-18 PortMaster Configuration Guide
Direction Direction in which the active session was initiated.
PortStatus Status of the serial interface.
Started Amount of time this session has been active.
Idle Amount of time this session has been idle.
InSpeed Estimate of the current inbound bandwidth in bits per
second of the serial interface.
OutSpeed Estimate of the current outbound bandwidth in bits per
second of the serial interface.
ModemName
(PortMaster 3 only) Text string containing the name of the digital modem in use
by the serial interface.
IpAddress IP address associated with the serial interface. When
characterizing a network port, this value is the IP address of
the remote user. When characterizing a device or login port,
this value is the IP address of the host to which the user is
connected.
ifDescr Text string containing information about the network
interface bound to the serial interface.
InOctets Total number of octets received on the serial interface.
OutOctets Total number of octets transmitted on the serial interface.
QOctets Total number of octets queued on the serial interface.
ModemStatus Status of the modem used by the serial interface.
ModemCompression
(PM-3 only) Compression being used in the modem or by the serial
interface.
ModemProtocol
(PortMaster 3 only) Error correcting protocol being used in the modem or by the
serial interface.
ModemRetrains
(PortMaster 3 only) Number of retrains attempted by the modem attached to
the serial interface.
ModemRenegotiates
(PortMaster 3 only) Number of renegotiates attempted by the modem attached
to the serial interface.
Table 3-6 Serial Interfaces Table (Continued)
Object Definition