Lucent Technologies PortMaster User Manual

Page 282

Configuration Steps for Shared Device Access

18-6

PortMaster Configuration Guide

Leave all other settings at their default values.

After you configure port S2 as shown in Table 18-3, enter the following commands to
reset the port and save the configuration:

Command> reset s2
Command> save all

For more information about serial asynchronous ports, refer to Chapter 5, “Configuring
an Asynchronous Port.”

Speed 1

set s2 speed 1 115200

Speed 2

set s2 speed 2 115200

Speed 3

set s2 speed 3 115200

Modem control

set s2 cd on

Hardware flow control

set s2 rts/cts on

Software flow control

set s2 xon/xoff off

Host

set s2 host default

Security

set s2 security on

(If you turn security on, you must also configure the user
table or RADIUS.)

set s2 service_login portmaster

Device service

set s2 service_device portmaster

Table 18-3

Serial Port Values (S2) (Continued)

Setting

Command