Lucent Technologies PortMaster - Manual (Page 55)

Configuring Global Settings 3-17
Configuring SNMP
The SNMP manager queries the agents by means of OIDs. Each OID uniquely identifies
a single MIB variable. For example, the OID 307.3.2.1.1.1.2.0, returns the portname for
port S0, and the OID 307.3.2.1.1.1.2.1 returns the port name for port S1 (see Table 3-5).
Table 3-5 Partial View of the Livingston Serial Table.
PortMaster Serial Interfaces
Table 3-6 lists the objects in the serial interface table from the Livingston Extensions
section of the MIB. Modem-specific objects apply to the PortMaster 3 only.
OID S0 (0) S1 (1) S2 (2) S3 (3) S4 (4)
...307.3.2.1.1.1.1 Index Index Index Index Index
...307.3.2.1.1.1.2 PortName PortName PortName PortName PortName
...307.3.2.1.1.1.3 PhysType PhysType PhysType PhysType PhysType
...307.3.2.1.1.1.4 User User User User User
...307.3.2.1.1.1.5 SessionId SessionId SessionId SessionId SessionId
...307.3.2.1.1.1.6 Type Type Type Type Type
...307.3.2.1.1.1.7 Direction Direction Direction Direction Direction
Table 3-6 Serial Interfaces Table
Object Definition
Index Unique value for each serial interface.
PortName Text string containing the name of the serial interface (for
example, S0, W1, and so on).
PhysType Type of physical serial interface, distinguished according to
the physical or link protocol(s) currently being used on the
interface.
User Name of the active user. Blank if not active.
SessionId Unique session identifier that matches the RADIUS session
ID.
Type Active type of service being provided by the serial interface.