Kodak DCS 410 - Manual (Page 95)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Using the Camera G 5-5
If this occurs, choose another focus mode, or take some other
action — for example shoot from a different position — which
will allow focusing to occur.

You will not be able to shoot if you have set the exposure-mode
to one of the two programmed auto exposure modes offered
(either
P or Ps), unless you have set the lens to its smallest aper-
ture.
6. Lightly press the shutter release button to awaken the camera. The
camera LCD panel and the viewfinder LCD display data. The camera
is ready.
NOTE: To conserve battery power, the camera and camera back automati-
cally turn off after approximately five seconds. This means the camera is no
longer in a ready state. If you do not see the current shutter speed and
aperture on the Nikon N90s camera LCD panel and in the viewfinder LCD,
you can immediately reawaken the camera by lightly pressing the shutter
release button again.
MODE
ISO
DRIVE
OFF
Ps
Aperture
Shutter speed
S