Kodak DCS 410 - Manual (Page 67)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Preparing the Camera and the Computer G 4-23
6. Attach the other end of the SCSI cable to the SCSI connector on the
camera.
25-pin Connector
SCSI Connector
7. (Optional) Later, to disconnect the camera from the computer, shut
down the computer and all external SCSI devices, and then power off
the camera. Then restore the SCSI cables and terminator to the state
they were in before the camera was connected. Do not leave a SCSI
cable with an empty connector dangling from a SCSI chain.
Continue at “Inserting and Removing a PCMCIA Card” later in this
chapter.